JP Panic ARTF (52-90cu IC or 4S 5000mAh)

JP Panic ARTF (Electric or i.c.) JPDAA1001

Because having fun is all the rage
The iconic performance aerobatic bipe, renewed and refreshed for the modern age to suit 4S electric or .52 to .90cu.in. i.c. engines

Key Features

• True to the design and character of the original.
• Laser-cut balsa and ply.
• Pre-applied Oracover scheme.
• Pre-formed wire undercarriage.
• Suitable for an electric or i.c. power plant.
• Supplied with motor stand-offs and engine mount.
• Quality hardware throughout, including fuel tank and wheels.
• Banded wings with press stud struts.
• Suits 670KV 4S electric set-ups.
• Perfect for .52 to .90cu. in. i.c. engines.
• Pre-built and covered airframe components.
• Outstanding flying characteristics.
• Capable of extreme high-alpha flight.

What's in the Box
1x Pre-built and covered fuselage.
1x Pre-built and covered upper wing.
1x Pre-built and covered lower wing.
1x Pre-built and covered tailplane.
1x Pre-built and covered fin and interplane strut set.
1x Quality hardware pack.
1x Engine mount and motor stand-off set.
1x Comprehensive instruction manual.

Needed to Complete
1x 6-ch transmitter and receiver combo.
1x 5055-670KV brushless outrunner (EP option).
1x 80A SBEC speed contoller (EP option).
1x 4S 5000mAh 50C LiPo (EP option).
1x .52 – .90cu. in. two-stroke (i.c option).
1x Hitec HS485HB servo (i.c. option).
4x Hitec HS5625MG servos (flying surfaces).
1x Propeller to suit chosen motor / engine.

Product Description
It’s hard to believe that the original Avicraft Panic was designed over 40 years ago, yet it’s as relevant now as it was back in 1982 when creator, Phil Newman, took pen to upturned wallpaper and began draughting. The result was a superficially simple yet ingeniously cunning biplane sportster that could not only fly the book and take the knocks but offered immense versatility from its eclectic choice of engines. Fast forward four decades and the Panic remains as entertaining as ever. Modified to meet the exacting requirements of today’s performance-savvy pilots, this new ARTF version of the club favourite is not only light in weight and beautifully built, it caters for both i.c. and electric power plants and anyone with a thirst for 3D flight.

Aeroplane Technical Specifications

• Product Length 970mm 38in
• Product Wingspan 1,220mm 48in
• Completion Level ARTF
• Experience Level Intermediate / Advanced
• Assembly Time 300min
• Recommended Usage Environment Designated outdoor model flying facility
• Material Balsa / ply